 |
|
|
|
|
|
|
|
|
|
|
| |
SHIVAM MARKETING & SERVICES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 TEXTILE MACHINE |
|
 |
|
 |
|
 |
COMPUTER CONTROLI |
By using Balkan Computer-Controlled Weighing System it is possible to have an sensitive mixture of the materials with diffrent features(like cotton ,polyster,acrylic and viscon)in linewith the required mixture rations
Diffrent fibers can be hand-feed on the B-14 Weighing Bale Opener bands or can be automatically feeds from the fiber cleaner or opener line with B-16 Scaled Bale Opener with Condenser and an sensitive weighing can be made
if needed it is possible to follow up the statistical information on th cv values and the total weights by getting a print out from the industrial computer.Besides that the computer provides the opporunity of using the information and rapidly following its up by storing the mixture ratios in the organizations into the memory of the computer in recipe from when the previously recorded recipes are needed The material mixed after weghing is fed from the fm band to the B-40 Multi Mixer so that a homogenous mixture is obtained For the mixture thread producing organizations manufaturing with a weghing system is very important when laboring and quality is taken into consideration |
 |
WEIGHING BALE OPENE |
| The weighing system of the B-15 continuous electronic band is used in blending of the diffrent materials in the productions of Non-woven materilas .The control panel can be adjusted to the desired % levels.Each machine has a capacity of 750 kg/h and a weghing sensitivity of%1.The three-blend weghiing system's max Capacity is 2250 kg/h.the material feeding band is 3m long |
 |
BALE OPENER |
| The B-10 BALKAN BALE OPENER,besides having a superior opening and mixing performance has also excellent cleaning prperties for cotton with the help of the adjustable grid system underneath each of the two openers.For systhetic fibers there is only one opener which executes the opening process without damaging the fibers.As there is not much need to cleaning with sythetics the grid system has been omitted.The Bale openers which can be manufactured in 1200 and 1600 mm widths have a high capacity the material is placed on to the moving band in front of the Bale Opener.The band feeds the material to the storage chamber of the Bale Opener,which is controlled by a photocell,untill its is full The second band beneath the storage chamber starts moving on request and the spiked band opens the material and moives it to the opening cylinders.The feed rate of the material from the spikedband can be increased or decreased with the use of frequnceycontrolled motor |
 |
DOUBLE CYCLINDER OF |
| Besides having a progressive cleaning effect fro cotton containing a high degree of waste material The B-20 BALKAN Double-Cyclinder machine has also a high degree of opening capabilities at the start of the cleaning process.In B-20 Double-Cyclinder the cleaning is done without holding the fibers while they are floating freely.The cleaning process is done by the interation of themetal rods and the gridsand the moving air Thus cotton is cleaned of its roughage and opened without being damaged.As in all modern cleaning machinery.these is an automatic waste collection system The cotton outflow pipe has been placed higher than the inflow pipe in machine.Thus air current floats the lighter cotton fibers.enabling the opened and cleaned cotton to leave the machine without beingoverbeaten.this avoids loss of goods fiber,napping and knotting.Bigger limps of fiber get knotted or fall between the grids.These are kept in the machine by an adjustable value unitl they are separated into smaller clumps and cleaned of waste materials.The cotton that reaches the holding cleaning point after B-20 Double-Cyclinder is not only well opened but also the same overall size |
 |
MULTI MIXER |
| Mixing the cotton is necessary fro eliminating diffrences between bales and obtaining a uniform thread quality.The choice of mixer depends on the design of the blending facility the amount of flexibility wanted from the facility,the expected production capacity and finally on the control mechanism of the facility in design requiring hign production capacities and which are to be divided into several combing lines it is necessary to use mixers with high storage capacity.in facilities woth medium to low production capacities and with undivided combing lines working with constant material flow mioxer with likewise low capacity or even small mixers placed one after the other.The chambers of the mixers are filled one after the other.The chambers of the mixers are filled one after the other by material transport motor and equal amount are taken out .Thus an ideal mix is obtained at the start of thread production has a special importance for the processes of thread productios,weaving and even finishing .Even when we dont consider the blend sidparities between bales odf diffrent origins the differences in the maturity,color,length and thickness of fiber cause differences in the strength,smoothness,dye absorbency,and the operation of the facility |
 |
CONDENSER & FEEDEI |
| The B-25 BALKAN Condenser is used to convey the material,and to clean it of dust at the same time,The fan in the condenser sucks the air from both sides of the condenser screen,causing the material to be sucked from the previous machine.The material is cleaned of dust as it passes through the condenser screen,and is moved to the feeding band after being opened.the dusty exhaust air discharged from the fan should be sent to a dust filter.There is reservior above the B-30 BALKAN Feeding Tower.Through a photocell arrangement here cotton level is controlled ans the previous machine is commanded .There is a pair of feeding cyclinder on the basement of the reservior tower.With the help of these cylinder regularly before its speed control There are externally adjustable grids under the needed cylinder and foreign material within the cotton are cleaned with them to certain extent |
 |
PIN OPENER |
| The material placed on the freguency controlled feeding band is fed to the full-spiked beatter cylinder that has sharp and angled pins which comb clean the cotton .the grid system underneath the beater cylinder is adjustable from the outside even while the machine is working.In this way the amount of cleaning is regulated.The cotton clusters leaving the beather are conveyed by the B-25 BALKAN Condenser and thus cleaned of dust this machine can also be used for synthetic fiber.The openers of the B-52 Fiber Opener System open the material at the reguired degree without damaging the chemical filament fibers used in non-woven fabric industry and by thrad spinning factories.The lenght of the pins on the cylinder can be 6 to 12mm according to the condition of material to be opened.With an additional electronic system,the potential jamming problem at the feeding and opening cyclinders has benn eliminated if the RPM of the opening cyclinder falls below a certain limit the feeding band automatically stop feeding if the decrease continues the band reverses |
 |
AIRJET CLEANER |
| As the step in the opening and cleaning process,B-60 BALKAN Jet Cleaner should be used to remove fine waste materials trash and naps.There are no moving mechanical parts in this system to damage the fiber;the system works on a simple centrifugal principle .The material raeches a certain velocity as it passes through the machine in an hign velocity air stream and hits the adjutable blade placed at the trash rejection nozzle,shaking loose the waste material .the amount of air passing through the machine is very important There is a fan inside the machine to adjust this,A B-25 BALKAN Condenser otr a B-70 BALKAN Dust Extraxtor should be placed in downstream of the Jet Cleaner to provide the air flow |
 |
FINE OPENER |
| The cylinder of the B-55 BALKAN Fine Opener is wrapped with a saw-tooth wire.The flow of the cotton is achived with a frequency controlled reduction motor.the cotton is fed to the cleaner throughduble cylenders covered with identical saw-tooth wire to avoid fiber damage.This ensure that the fibers are not turn off,but combed.the fibers that go through two blades below the opening vane are driected by the combing segment.Air moves through at a greater speed than the vanes and pulls the fibers out.The fine Opener prepares the cotton for optimal carding ideally opened and separated into the smallest fiber clusters |
 |
FINE OPENERS |
| Thecylinder of the B-55 BALKAN Fine Openers is wrapped with saw-tooth wire.The flow of the cotton is achived with a freauency controlled reduction motor.The cotton is fed to the cleaner throughdouble cylenders covered with identical saw-tooth wire to avoid fiber damage.this ensure that the fibers are not turn off,but combed.The fibers that go through two blades below the opening vane are driected by the vanes,and pulls the fibers out The fine Opener prepares the cotton for optimal carding ideally opened and separated into the smallest fiber clusters |
 |
DUST EXTRACTOR |
| With the establishment of rotor spinning the elimination of dust from cotton has become more inportant.One of the main factors of economic production conditions is the elimination of micro dust and fiber particles in the cotton.Each condenser and cleaner on the line has this function.But as dust extarction takes place on the outside of the fiber bunch ideal cleaning takes place when maximum opening is reached.this point is reached at the very last phase of the cleaning process.For this final phase of the ,a high performance dust extractor the B-70 BALKAN Dust Extracor should be clean the cotton of dust but also ensure the optimal feeding of the combs without altering the degree of opening.A conveying fan placed in the machine takes the material from the final cleaner and hurls is at great speed at the screen.The air-fiber mixture forms a thin layer of fiber on the screen with the help of side to side moving vanes and fallas onto a suction system .The inside of the screen is sucked off an aspirator and the fiber is conveyed to the requried location while dust is sucked from the rear of the screen by another aspirator,Thus away from the cotton |
 |
WILLOMAT |
| The B-97 Balkan Willomat machine comprises fo fedding band step cleaner,Condenser Fedding Chamber and Electric Panel with Timer.The B-67 Willomat is an ideal machine for opening and cleaning cotton waeve waste.The waste that is to be cleaned can be placed on the fedding band manually.The Feddinf Band will carry the material to the step cleaner periodically,for a preset time the step cleaner comprises of six beaters.Underneath five of the beaters there are steel grids adjustable from the outside.the 3600m3/h capacity Condenser take the material from the top beater of the step cleaner.This process is repeated unitll the preset time realy stop it.The cleaning time the grid setting can be adjusted to give the optimum result fro the material being step .After the ned of the cleaning period a third timer start working.This realy sets the unloading and controls the unloading valur.As a lot o waste material is generated during the cleaning process.it is sucked out by an aspirator placed undernath the step cleaner |
|
|
 |
|
 |
|
| |
|
|
|
|
| For More Details Contact :- |
| Shivam Marketing & Services |
Address : 1652, 'E', Yashwant Sankul, 7th Lane,
Rajarampuri, Kolhapur. 416 008
MAHARASHTRA STATE, INDIA |
| Telephone : +91-231-2520872 |
| Fax : +91-231-2527898 |
| Email :
info@shivam.in
|
|
|
|
|
|
|
|
|
|
|
